Product : Charge Controllers (MPPT100/20)
Maximum Power Point Tracking technology
- increases the efficiency of your PV system
- Less expensive solar-panels for grid-feed-in systems can now be used for 12/24V off-grid systems
- Electronic protection (reverse polarity, over-current, short-circuit, over-temperature)
- High efficiency
- DIN Rail compatible
- Negative ground
With innovative maximum-power-tracking technology, Phocos' MPP-Tracker ensures maximum performance from your solar array at all times and in all weather conditions. The MPPT can yield an energy gain of up to 30% from your PV array (with the average gain being 10%-25%).
MPPT includes a sweep-function which runs through the whole solar-panel voltage range once every 2h to find the point of the absolute maximum power output
The temperature-compensated three-stage I-U curve charge regulation alogarithm significantly extends the lifespan of your battery.
The possibility to use less expensive grid-feed-in solar-panels with up to 95V open circuit voltage for 12V or 24V stand-alone systems will significantly reduce the cost of the total system.
| TYPE |
MPPT 100/20-1 |
| Nominal Voltage |
12V/24V,automatic recognition |
Max. Solar Input Voltage Voc
|
95V |
Max. PV Input Power
|
300W@12V, 600W@24V |
| Max. Battery Charge Current |
20A |
| Power Conversion Efficiency |
up to 97 % |
Standby Power Consumption
|
< 30mW at 12V system voltage (< 2mA)
< 80mW at 24V system voltage (< 3mA) |
Temperature compensation
|
-4 mV/cell*K |
| Max. wire size |
32mm2 |
| Dimensions |
185 x 150 x 115mm |
| Weight |
1.6kg |
| Temperature range |
-40 to +50 °C |
| Type of protection |
IP22 |
|